Usually, trucks are known as utility vehicles. This is considered to be the most effective way to take any kind of burden. But in many cases, the bed of the truck gets damaged while carrying the load. So many people want to swap it for a flat bed.
But to do this you first need to open the stock bed and put it aside. The process of unbolting and disconnecting a steel truck is fairly simple but somewhat time-consuming. If you have no idea how to remove a ford truck bed then this article is for you.
We will now outline some guidelines step by step which will help you to easily do this. So let’s get started with it.
How to Remove a Ford Truck Bed
Remove a ford truck bed properly you have to follow the steps which are discussed the in the below. so let’s do that.
Step 1:
First, open Ford’s tailgate and remove the taillights from the bed using the Phillips-head screwdriver. Then unplug the bulbs from the back of the lens with your hand and lower the wire harness to the ground through the toilet bucket on the bed. This will ensure that when you lift the bed, you do not pull the wire harness too much.
Step 2:
Now you need to open the gas door. Then unlock the gas filler neck from the bed using a 1/4-inch ratchet and socket and push the gas filler neck towards the bed.
Step 3:
Unbolt the bed from the frame using a 1/2-inch ratchet, extension, and socket. Depending on the length of your bed there are a total of eight bolts holding the bed in addition to the frame. Bolt up the frame and outside the bed.
Step 4:
Place your assistants around the bed so you can distribute the weight of the bed evenly among people. Lift the bed vertically to the frame with your feet. Be careful when you lift around the wheels.
Final Thoughts:
Removing a ford truck bed is not a very difficult task but many people do not know how to remove a ford truck bed. Thinking about them, here is a guideline that will help them enough to do this. Hopefully, this small effort of ours will be helpful for all of you.
