However, it can be difficult to remove them once they have been installed. Whether you want to replace or reuse them, you need to get them out. This can be done with basic hand tools and a drill.
In this article, we will guide you through the simple steps for how to remove rivet nuts quickly and easily.
Credit: www.spyderindustries.com
How to Remove RivNut: A Detailed Guide
Tools you’ll need:
- Drill
- Drill bit (slightly larger than the Rivnut’s outer diameter)
- Pliers
- Screwdriver or bolt (fits snugly into the Rivnut)
Step 1: Prepare the work area
Ensure you have enough space to work comfortably and gather all the necessary tools. It’s also a good idea to wear safety goggles and gloves to protect yourself.
Step 2: Expose the Rivnut
If there is any fastener or thread attached to the Rivnut, remove it using appropriate tools. This will expose the Rivnut’s body for easy removal.
Step 3: Drill a hole
Select a drill bit that is slightly larger than the outer diameter of the Rivnut. Insert the drill bit into the center of the Rivnut and start drilling. Apply firm and steady pressure while drilling through the entire length of the Rivnut. Take care not to damage the surrounding material.
Step 4: Remove the Rivnut body
Once the hole is drilled, use pliers to grip the Rivnut’s body firmly. Twist and pull the Rivnut out of the hole. If the Rivnut is difficult to remove, you can use pliers to crush it and break it into smaller pieces, making it easier to extract. Be cautious not to damage the hole or the surrounding material.
Step 5: Clean the hole
After removing the Rivnut, clean any debris or remnants left in the hole. You can use a brush, compressed air, or even a vacuum to ensure the hole is clean and ready for future applications.
Step 6: Optional
Clean the threads If there are any remaining threads or residue from the Rivnut, you can use a tap or thread chaser to clean the threads in the hole. This step is particularly useful if you plan to install a new Rivnut or any other threaded fastener in the same hole.
That’s it! By following these detailed steps, you should be able to remove a Rivnut effectively. Always exercise caution while using tools, and remember to prioritize safety throughout the process
How to remove a rivnut (water bottle fitting) and replace it.
Frequently Asked Questions For How To Remove Rivet Nuts
How Do I Remove Rivet Nuts?
To remove a rivet nut, you’ll need a drill, a drill bit, and a wrench. Drill out the center of the rivet nut, then use the wrench to unscrew and remove it.
What Size Drill Bit Do I Need To Remove A Rivet Nut?
The size of the drill bit you need to remove a rivet nut depends on the size of the rivet nut. Measure the rivet nut’s diameter, then select a drill bit that is slightly larger than that diameter.
Can I Reuse A Removed Rivet Nut?
No, it’s not recommended to reuse a removed rivet nut. Removing a rivet nut deforms it, which can compromise its strength and lifespan.
Conclusion
Removing rivet nuts may seem daunting, but with the right tools and techniques, it can be done safely and efficiently. By following these steps, you can remove rivet nuts from any surface without causing damage or harm. Remember always to prioritize safety by wearing protective gear, using the correct tools and applying care and precision when removing the nuts.
Don’t forget to assess the surface for any damage or deformities before beginning the removal process. With practice and experience, you will become a master at removing rivet nuts, and it will no longer seem like an intimidating task.