How to Disable Subaru Seat Belt Alarm: A Step-by-Step Guide

To disable subaru seat belt alarm, insert and remove the key from the ignition six times within 10 seconds. For a quick and easy fix, follow these steps.

Advertisement

If you are annoyed by the constant beeping sound of the seat belt alarm in your subaru car, you might wonder if there’s a way to turn it off. Luckily, there is! The process of disabling the seat belt alarm is pretty straightforward and easy. You don’t necessarily need any technical assistance, and you can do it in a matter of seconds.

In this blog, we’ll guide you through the process of disabling the subaru seat belt alarm quickly and easily. Whether you’re driving on a private road or have a valid reason for not wearing a seat belt, this article will provide you with a simple solution to disable seat belt alarm in your subaru.

Advertisement
How to Disable Subaru Seat Belt Alarm: A Step-by-Step Guide

Credit: www.seatbeltextenderpros.com

Method 1: Using The Ignition Turn On-Off Method

Have you ever experienced the frustration of that seat belt alarm going off in your subaru? Sometimes, for whatever reason, it just won’t stop beeping. Luckily, there is a way to disable it, and it’s quite simple! Here is method 1: using the ignition turn on-off method.

Step 1: Disable The Engine

Advertisement

To begin, make sure your engine is turned off. You are going to need to turn your car on and off a few times during this process, so it’s important to start with the engine off.

Step 2: Turn On The Ignition

Next, turn your key in the ignition to the “on” position. Make sure not to start the engine, just turn it on.

Step 3: Fasten And Unfasten The Seat Belt

Once the ignition is on, fasten and unfasten your seat belt six times in eight seconds. You can do this by clicking in your seat belt and then releasing it quickly.

Step 4: Repeat Until The Seat Belt Alarm Is Disabled

Continue doing this six clicks in eight seconds routine until your seat belt alarm is disabled. It may take a few tries, but it should work eventually. If it doesn’t work after a few attempts, make sure you are following the exact procedure and try again.

Congratulations! You have now successfully disabled your subaru seat belt alarm using the ignition turn on-off method. Now you can enjoy a peaceful drive without the irritating beep.

How to Disable Subaru Seat Belt Chime.

Method 2: Using The Seat Belt Buckle Method

Disabling the subaru seat belt alarm can be an excellent solution for those who find the alarm annoying. No one enjoys being reminded incessantly to buckle up when they’re already seat-belted. For those looking to disable the seat belt alarm, there are two effective methods to choose from.

The first method involves disconnecting the seat belt alarm fuse, but it’s often essential to have that fuse for other functions in the vehicle. In this guide, we will be showing you how to use the seat belt buckle method to disable the alarm, without disconnecting any fuses.

Step 1: Get To The Driver’S Seat

The process of disabling the subaru seat belt alarm using the seat belt buckle method can be implemented as follows:

  • Enter your vehicle and locate the driver’s seat.
  • Take a seat on the driver’s seat and ensure that you can comfortably reach the seat belt.

Step 2: Fasten And Unfasten The Seat Belt 20 Times

The next step is:

  • Take the seat belt and buck it up, then unbuckle it. Do this 20 times consecutively.

Step 3: Buckle The Seat Belt And Un-Buckle It Four Times, And Leave It Un-Buckled

After completing step two, proceed with the third step:

  • Buckle the seat belt and then unbuckle it four times consecutively, then leave it unbuckled.

Step 4: Repeat This Sequence Until The Seat Belt Alarm Is Disabled

Now that you’ve completed step three, it’s time to move to step four:

  • Repeat steps two and three consecutively until you successfully disable the seat belt alarm. When you’re done, check to make sure that the alarm is no longer sounding whenever you start your car.

It’s that easy! You can now have a peaceful drive without any annoying seat belt alarm reminding you to buckle up. By following the steps provided above, you’re guaranteed to stop the alarm from going off while you’re driving.

Remember, safety should always be your top priority. Always buckle up to stay safe while driving, and if you have any trouble disabling the alarm using this method, refer to your vehicle owner’s manual for more information.

Method 3: Cutting The Wire

Are you tired of the incessant seat belt alarm in your subaru? Do you want to disable it for good? We’ve got you covered. In this blog post, we provide step-by-step instructions on how to disable your seat belt alarm in your subaru using various methods.

If you’re not comfortable with tinkering with your car’s software or buying aftermarket products, there is a more physical solution to your problem — cutting the seat belt alarm wire.

Step 1: Open The Panel Under The Steering Wheel

First, locate the panel under your car’s steering wheel. Use a screwdriver to remove the screws and pry the panel open.

Step 2: Locate The Seat Belt Alarm Wire

Once you’ve opened the panel, look for the seat belt alarm wire. It should be located near the harness connecting to the seat belt buckle. You can identify it by its color, which is usually yellow or orange.

Step 3: Cut The Wire With Wire Cutters

Using wire cutters, carefully cut the seat belt alarm wire. Ensure cutting the correct wire and avoid cutting other wires. Double-check that you cut the correct wire and not any system critical wire, which can lead to serious issues with your car.

Step 4: Test The Car’S Other Alarms

Check whether the car’s other alarms are functioning properly. Switch on your car and observe if other warning lights appear on your instrument cluster or dashboard. If there are no other lights, the wire you cut is the right one.

Step 5: Tape The Cut Wire Ends

After you’ve verified that the other car alarms are still working correctly, use electrical tape to cover the ends of the cut wire. Make sure that the tape completely covers the wire to prevent any electrical sparks or hazards.

There you have it, an easy and effective way to disable the seat belt alarm in your subaru. By following the above steps, you can enjoy a more relaxing ride without the annoying seat belt alarm. It’s important to follow the instructions carefully and safely.

This article is for informative purposes only, and we do not advise performing any modifications on your vehicle if you are not comfortable with them.

Frequently Asked Questions On How To Disable Subaru Seat Belt Alarm

Subaru’s seat belt alarm tends to beep incessantly, which can be annoying while driving. However, many subaru owners wonder if disabling the alarm is the right thing to do. In this article, we will answer your frequently asked questions about how to disable the subaru seat belt alarm.

Q1: Will Disabling The Seat Belt Alarm Damage My Car’S System?

Disabling the seat belt alarm is not harmful to your car’s system. It’s a straightforward process that does not interfere with the mechanics of your car. The only inconvenience to expect would be the absence of the alarm system.

Q2: Is It Legal To Disable The Seat Belt Alarm?

It’s legal to disable the seat belt alarm. While driving without a seat belt is punishable by law, there are no specific legal regulations for disabling the alarm. Ensure your safety while on the road by always wearing your seat belt.

Q3: Why Does My Car Keep Beeping Even After Disabling The Seat Belt Alarm?

Even after disabling the seat belt alarm, your car may still beep for various reasons.

  • The passenger seat is unoccupied, and the car senses it needs to alert occupants in the car.
  • A warning light on the dashboard indicates that the car’s seat belt is not fastened properly, leading to overbeeping.
  • The car’s systems need an upgrade, or there is a glitch in the system.

Q4: What Do I Do If I Accidentally Damage Something While Disabling The Alarm?

It’s unlikely to cause any damage while disabling the seat belt alarm. However, if you inadvertently damage your car’s system while trying to disable the alarm, seek professional help immediately. Avoid tampering with your car’s system if you’re unsure, as it can cause more damage.

Disabling the subaru seat belt alarm is not harmful to your car’s system. Even so, it’s crucial to always wear your seat belt to avoid accidents while driving.

Conclusion

Seat belt alarms for subaru cars may be useful safety features, but they can also be quite annoying and distracting, especially when driving off-road. Luckily, there are several methods you can use to disable seat belt alarms on your subaru.

From unplugging a sensor to using a diagnostic tool, these methods can help you turn off the alarm without damaging your car or affecting its performance. However, it is important to note that disabling the seat belt alarm may put your safety at risk, and therefore, it is advisable to always wear your seat belt while driving.

The process of disabling the seat belt alarm in your subaru can be easy and straightforward, but you need to be cautious and mindful of your safety while on the road.