How to Change Speedometer Display on Jeep Grand Cherokee

To change the speedometer display on a jeep grand cherokee, access the driver information display menu and select the speedometer option. From there, choose the preferred display style.

Advertisement

Changing the speedometer display on a jeep grand cherokee is a simple process that can be done using the driver information display. The speedometer display can be modified to show the speed in either miles per hour or kilometers per hour, depending on the driver’s preference.

There are various display styles for the speedometer, such as a traditional analog gauge or a digital readout. In this article, we’ll outline the steps involved in changing the speedometer display on a jeep grand cherokee, making it easier for drivers to customize their driving experience.

Advertisement
How to Change Speedometer Display on Jeep Grand Cherokee

Credit: www.ebay.com

Understanding The Speedometer Display

Jeep grand cherokee is one of the best-selling suvs worldwide, offering several features that attract its fans. The speedometer display is one such feature that requires special attention, yet is often overlooked by some jeep drivers. Understanding the speedometer display is crucial for accurate readings and optimal performance.

In this informative article, we will discuss the key aspects of understanding the speedometer display and the importance of having an accurate one.

Advertisement

Explanation Of What The Speedometer Display Shows (Speed, Trip Distance, Fuel Level, Etc.)

The speedometer display on a jeep grand cherokee offers much more than just speed. Understanding each aspect of the display can provide crucial information for the driver.

  • Speed: this section is the most apparent and displays the current speed in miles per hour or kilometers per hour, depending on the driver’s preference.
  • Trip distance: this section indicates the total distance traveled since the last reset.
  • Fuel level: this section displays the amount of fuel remaining in the gas tank.
  • Engine temperature: this section shows the temperature of the engine coolant fluid.
  • Oil pressure: this section indicates the oil pressure of the engine.

Importance Of Having An Accurate Speedometer Display

Having an accurate speedometer display is essential for several reasons, some of which include:

  • Safety: driving with an inaccurate speedometer display can be dangerous, especially when on a highway or busy road. It is crucial to ensure that the driver doesn’t exceed the speed limit indicated on the display.
  • Fuel efficiency: an accurate speedometer display can help to increase fuel efficiency by indicating the correct fuel level. It can also help to track fuel consumption accurately.
  • Maintenance: an accurate engine temperature and oil pressure display can serve as early warning signs of engine damage, preventing costly repairs down the line.
  • Resale value: a well-maintained and accurate speedometer display can increase the resale value of the vehicle.

The speedometer display on a jeep grand cherokee is a vital feature that requires appropriate attention and maintenance. Understanding what the display shows and the importance of having an accurate one can help to maximize the vehicle’s performance and minimize any potential damage or safety hazards.

Regular checks of the speedometer display are also advisable to ensure optimal performance.

Tools And Materials

Are you tired of using the default display on your jeep grand cherokee’s speedometer? Do you want to change it up and add a personal touch to your ride? Luckily, this is a straightforward process that you can do on your own.

In this article, we’ll walk you through the tools and materials you’ll need to get started.

List Of Necessary Tools To Change The Speedometer Display

Before you begin changing the speedometer display on your jeep grand cherokee, you’ll need to make sure you have the necessary tools on hand.

  • Screwdriver set
  • Trim removal tool
  • Plastic pry tool
  • Pliers
  • Torx driver set
  • Soldering kit
  • Heat gun

Each of these tools serves a unique purpose in the process of changing your jeep’s speedometer display. The screwdriver set, trim removal tool, and plastic pry tool are used to remove the dashboard and access the speedometer. Pliers are required to remove the old display, and the torx driver set is needed to disassemble the speedometer.

A soldering kit and heat gun are used to attach the new display.

Link To Where To Purchase Any Required Materials

In addition to the necessary tools, you’ll also need some materials to complete the process of changing your jeep’s speedometer display.

  • Speedometer display: there are several options available online, including ebay and amazon. Make sure to purchase a display that is compatible with your jeep grand cherokee model and year.
  • Solder wire: you can find solder wire at any hardware store or online retailer.
  • Soldering flux: flux helps the solder adhere to the metal properly. You can purchase it online or at your local hardware store.
  • Heat shrink tubing: heat shrink tubing protects the wires and connections from damage. You can find it online or at a hardware store.
  • Double-sided tape: double-sided tape is used to attach the new display to the speedometer. You can find it online or at a hardware store. Make sure to use a tape that is suitable for automotive use.

With all of the necessary tools and materials, you’re ready to begin the process of changing your jeep grand cherokee’s speedometer display. Follow the steps carefully, and you’ll have a personalized display in no time!

Instrument Cluster Display-Digital dashboard on the car instrument panel of 2018 Jeep Grand Cherokee

Step-By-Step Guide

Jeep Grand Cherokee Speedometer Display Change: A Diy Guide

Are you having problems with your jeep grand cherokee’s speedometer display? If so, this guide is for you! Changing the speedometer display on your jeep grand cherokee is a simple task that requires only a few steps. With this step-by-step guide, we will walk you through the process of changing the speedometer display.

So, let’s get started!

Step-By-Step Instructions On How To Change The Speedometer Display

  • The first step is to gather the necessary tools. You will need a flathead screwdriver, a small pry tool or plastic scraper, a new speedometer display, and some patience.
  • Once you have all the tools ready, start by removing the trim panel from the dashboard. Use a flathead screwdriver to remove any screws or clips holding the trim panel in place, and gently pull it away from the dashboard.
  • Once you have removed the trim panel, locate the speedometer display. The speedometer display is usually located in the center of the dashboard. You may need to remove several screws or clips to access it.
  • After you have located the speedometer display, use a small pry tool or a plastic scraper to gently remove it from the dashboard. Be careful not to damage the dashboard or the wiring harness behind the display.
  • Once you have removed the old speedometer display, simply plug in the new one and test it out. Make sure everything is working correctly before you reassemble the dashboard.
  • To reassemble the dashboard, simply reverse the steps you took earlier. Start by replacing any screws or clips you removed, then replace the trim panel and securely attach it to the dashboard.

Including Visuals To Supplement Instructions

It’s always helpful to have visuals when completing a task, and changing the speedometer display on your jeep grand cherokee is no exception.

Troubleshooting And Tips

Are you wondering how to change the speedometer display on your jeep grand cherokee? Fortunately, replacing your speedometer display is easier than you might think! In this blog post, we’ll provide you with some helpful tips to guide you through the process and troubleshoot common problems that may arise along the way.

Tips For Those Who May Have Trouble During The Speedometer Display Change Process

Changing your jeep grand cherokee’s speedometer display can be a breeze with the right tips and techniques.

  • Turn off the engine before beginning any work on your vehicle. This helps to prevent any electrical shocks and allows you to work safely.
  • Make sure to disconnect the battery before starting the replacement process. This prevents any electrical mishaps and ensures that you won’t accidentally harm the electrical system.
  • Before you begin replacing your speedometer, gather all necessary tools, including a new speedometer display, screwdrivers, and pliers.
  • When removing your old speedometer display, be sure to keep all of the screws and connectors in a safe place. This makes it easier to keep track of what goes where once you start installing the new display.
  • Take your time during the installation process. Rushing can lead to mistakes and may cause you to miss important steps that could impact the overall longevity of your newly installed speedometer display.
  • Double-check all of your connections to ensure that everything is properly secured and functioning as it should be.
  • Test your new speedometer display to make sure it’s working before hitting the road.

Common Problems When Changing Your Jeep Grand Cherokee Speedometer Display

Though changing your jeep grand cherokee’s speedometer display is relatively simple, there are a few common issues that you may experience during the process.

  • The new speedometer display doesn’t work: this is often caused by a loose connection or an issue with the display itself. Make sure all connections are properly secured and try reinstalling the new display. If this doesn’t work, it may be necessary to replace the display itself.
  • The speedometer display is showing the wrong speed: this can be caused by an issue with the sensor or calibration. Check your owner’s manual to see if recalibration is necessary. Additionally, you may need to replace the sensor completely.
  • The speedometer display is dim or flickering: this could be due to a loose connection or a problem with the display itself. Check your connections and try reinstalling the display. If this doesn’t work, replacing the display may be necessary.
  • The display is upside down or showing the wrong units: this issue can be resolved by recalibrating the display or making sure that the display is installed properly.

Don’t worry if you encounter an issue or two when replacing your jeep grand cherokee’s speedometer display – with these troubleshooting tips and techniques, you’ll be back on the road in no time!

Conclusion

It’s essential to know how to change the speedometer display on your jeep grand cherokee correctly. You can do it within a few minutes, and it’s not a difficult task, even for beginners. Follow the steps mentioned in this blog post, and you’ll be able to change the speedometer display right away.

Ensure the safety and well-being of your vehicle by keeping a check on your speedometer display. Avoid any errors or miscalculations by updating the display as soon as possible. A few simple steps can make all the difference while driving.

Always prioritize your safety while on the road. With the guidelines mentioned above, you can change the speedometer display on your jeep grand cherokee and hit the road with confidence. Don’t hesitate to ask for help if needed, and go ahead and make the change today.