The Passive Anti-Theft System (PATS) is a factory installed security feature on all 1996 and later model year Ford vehicles. This system uses a transponder key to prevent the engine from starting if an incorrect key is used. If your Ford vehicle fails to start due to a PATS system failure, you can bypass the system by following these steps.
- Ford’s PATS system uses a key with a transponder in the head to prevent theft
- If you lose your key, you can purchase a new one from Ford, but it will need to be programmed by an authorized dealer
- There is another way to bypass the PATS system, but it requires two working keys
- If you have two working keys, you can program a third key yourself using the following steps: 3
- Entering Programming Mode: With both working keys in your possession, insert the first key into the ignition and turn it to position II (run)
- Within five seconds insert the second key into the ignition and turn it to position II (run)
- You should hear a chime indicating that you have successfully entered programming mode
- Adding Additional Keys: To add additional keys, simply repeat step 3 with each new key that you wish to program
Ford Pats Delete Software
If you’re a Ford owner, you may have heard of the “Pats Delete” software. This software is designed to remove the factory-installed anti-theft system from your vehicle. Many Ford owners choose to do this because they find the factory system to be annoying and unnecessary.
Pats Delete software is available for many different Ford models, and it’s relatively easy to install. In this blog post, we’ll provide some more information about Pats Delete and how it works.
The Pats Delete software is programmed to bypass the factory anti-theft system.
Once installed, it will allow you to start your vehicle without having to enter a code or use a key fob. This can be a great convenience if you often forget your code or lose your key fob. The downside of Pats Delete is that it also removes the security that the anti-theft system provides.
So if you’re looking for a way to make starting your Ford easier, but don’t want to sacrifice security, this isn’t the right solution for you.
Installing Pats Delete requires some basic mechanical skills. You’ll need to be able to locate and disconnect your vehicle’s battery, as well as remove a few panels in order to access the computer module that controls the anti-theft system.
Once you have access to the module, installation is simply a matter of following the instructions provided with the software.
Overall, Pats Delete can be a helpful addition for some Ford owners. But it’s important to weigh the pros and cons before deciding if it’s right for you.
If security is your top priority, then this isn’t an ideal solution. But if you’re tired of dealing with codes and key fobs, then give Pats Delete a try!
Credit: vehiclefreak.com
How Can I Bypass the Ford Pats Without a Chip Key?
There are a few ways that you can bypass the Ford Pats system without using a chip key. One way is to use a diode bypass kit. This kit will allow you to connect two wires to the ignition switch and bypass the PATS system entirely.
Another way is to use a resistor bypass kit. This kit will trick the PATS system into thinking that there is a key with a chip present, even if there isn’t one. Finally, you can also replace the PATS module with one that has been programmed to accept your specific key code.
This method will require some programming knowledge, but it is the most permanent solution.
How Do You Bypass Ford Theft System?
Assuming you are referring to the factory installed anti-theft system:
There are a few ways that you can bypass Ford’s anti-theft system. One way is to use a special key that is cut differently than a regular key.
This will disable the theft system and allow you to start the car. Another way is to disconnect the battery for a period of time (usually around 30 minutes). This will also disable the theft system.
If you have aftermarket parts installed on your Ford, such as an alarm system, there may be additional steps required to bypass the anti-theft system. Consult your owner’s manual or an authorized dealer for more information.
Can You Disable Ford Pats?
If you’re looking to disable your Ford PATS system, there are a few things you’ll need to do. First, you’ll need to find the fuse for the PATS system. This can be found in the fuse box under the hood of your car.
Once you’ve found the fuse, simply remove it and your PATS system will be disabled. However, keep in mind that this will also disable your car’s remote starter and alarm system. So if you have those features, they won’t work either.
Additionally, your car’s keyless entry will also be disabled.
How Do I Get My Car Out of Anti-Theft Mode Without the Key?
If your car has an anti-theft system, it will usually require the key to be inserted into the ignition in order for the engine to start. If you don’t have the key, then you’ll need to get a new one from the dealer or locksmith. In some cases, you may be able to disable the anti-theft system using a special code or by disconnecting the battery, but this will vary depending on the make and model of your vehicle.
How to. beat that. Ford. PATS. Alarm. This is.aTrue Bypass. on a Ford simple. to do. petethewrist
Conclusion
In order to bypass the Ford PATS system, you will need a key that is programmed with the proper transponder chip. If you do not have a key that is programmed with the correct transponder chip, then you will not be able to start your vehicle. There are a few different ways that you can bypass the Ford PATS system without using a key.
One way is to use a device called an RFID reader. This type of device can be used to read the information on the transponder chip in your key and then send it to the computer in your vehicle. This will allow you to start your car without having to use a key.
Another way to bypass the Ford PATS system is to use a device called an ignition module emulator. This type of device will emulate the signal from a real transponder chip and allow you to start your car without using a key.
