A S10 rear end is approximately 60 inches wide. This measurement may vary slightly depending on the year and model of the vehicle.
If you’re looking to swap out the rear end in your S10, you might be wondering how wide it is. The answer is: it depends. Rear ends come in a variety of widths, so you’ll need to measure yours to see what will fit.
Generally speaking, though, most S10 rear ends are between 60 and 70 inches wide. So if you’re looking for a wider rear end, you may need to look elsewhere.
How Wide is a Chevy 10 Bolt Rear End?
Assuming you are referring to the GM 10 bolt 8.5” rear end, it has a ring gear diameter of 8.5” and 28 spline axles. The width varies depending on the vehicle it came in. For example, it is 60.3” wide in a first gen Camaro, 61” wide in a ’78-87 Monte Carlo and 59.6” wide in an S10 truck.
How Wide is a Ford 9-Inch Rear End?
The Ford 9-inch is a popular automotive axle used in a wide variety of cars, trucks and SUVs. Though its exact dimensions vary depending on the application, the 9-inch typically measures about 8.8 inches wide at the housing flanges. The overall width of the axle depends on factors such as wheel offset and tire size.
How Long are S10 Axles?
S10 axles come in many different lengths, depending on the model of S10 truck. The most common length for an S10 axle is 60 inches, but they can range from 58 to 63 inches.
How Wide is a G Body Rear End?
Assuming you are referring to the width of the rear axle on a GM G-body car, the answer is 60.5 inches. This measurement is taken from the outside edge of each tire to the other outside edge of the same tire.
Chevy S10 Rear End Specs
The Chevy S10 is a small truck that was produced by Chevrolet from 1982 to 2004. The S10’s rear end is an important part of the truck, as it houses the differential and helps support the weight of the engine and transmission. The specifications for the S10’s rear end vary depending on the year and model of the truck.
Here are some general specs for the S10’s rear end:
-The width of the axle housing is 60 inches.
-The track width ( distance between the centers of the wheels) is 50 inches.
-The wheelbase (distance between the axles) is 108 inches.
-The spring perches are located 10 inches in from each side ofthe axle housing.
Conclusion
A user on a Chevy truck forum recently posed the question, “How wide is a S10 rear end?” In order to answer this question, one must first understand what a S10 rear end is. A S10 rear end is the differential housing and axle assembly from a Chevrolet S10 pickup truck.
This particular component is often swapped out with other similar parts in order to improve the performance of a vehicle.
The width of a S10 rear end can vary depending on the year and model of the truck. However, most S10 rear ends are between 60-62 inches wide.
Some older models may be narrower, while some newer ones may be slightly wider. Regardless of the exact width, all S10 rear ends will fit within a standard 72 inch wide wheelbase.