How to Turn off Auto High Beam Chevy Equinox

Specific steps to turn off the auto high beam feature in a Chevy Equinox might vary depending on the model year and trim level. Here’s how you might be able to turn off the auto high beam feature in a Chevy Equinox:

How to Turn off Automatic High Beams Chevy Equinox

1. Locate the Controls:

Look for the headlight control stalk on the left side of the steering column. This is the lever that typically controls various lighting functions including headlights, turn signals, and high beams.

2. Turn Off Auto High Beams:

Usually, the auto high beam feature can be turned off by adjusting the headlight control stalk.

Here’s a general approach:

  • a. Start your vehicle and ensure the headlights are in the “Auto” position.
  • b. If your Equinox is equipped with the auto high beam feature, there should be a setting on the headlight control stalk that allows you to switch between different headlight modes, including auto high beams.
  • c. Depending on the design, you might need to push the control stalk away from you or pull it toward you to cycle through the different modes.
  • d. Find the setting that turns off the auto high beam function. This might be labeled as “Auto High Beams,” “Auto High/Low,” or something similar.

Once you’ve found this setting, select the mode that disables the auto high beams.

3. Confirm:

Once you’ve made the selection, the dashboard display or an indicator light might show that the auto high beams have been turned off. Additionally, you can check the behavior of the high beams during night driving to verify that they no longer automatically switch between high and low beams.

Remember that these instructions are based on a general understanding of how auto high beams are usually controlled in vehicles. Your vehicle’s owner’s manual will have the most accurate and up-to-date information on how to control the auto high beam feature for your specific model and year of Chevy Equinox.

If you’re unsure about the steps, I recommend referring to your vehicle’s owner’s manual or contacting a Chevrolet dealership for assistance.

2020 Chevy Equinox How to Deactivate the auto High Beams

How to Turn off Auto High Beam Chevy Equinox


Q1: How Do I Turn off the Auto High Beam Feature on My Chevy Equinox

Turning off the auto high beam feature on your Chevy Equinox is simple and straightforward:

* Press the “Auto High Beam” button located on the left stalk of the steering wheel.

* The Auto High Beam indicator will turn off once it is selected.

* Confirm that you want to turn off this feature by pressing and holding down the “Auto High Beam” button for five seconds until a confirmation message appears in your dashboard display.

Following these steps should disable your vehicle’s Auto High Beam feature, allowing you to switch between standard low beams and high beams manually when necessary.

Q2: Does My Chevy Equinox Have an Auto High Beam Feature

Yes, your Chevy Equinox has an Auto High Beam feature. This feature helps you see further and better in the dark by automatically dimming or brightening the high beams depending on the surrounding traffic. Auto High Beam Benefits:

• Improved visibility – See farther and clearer at night with automated control of your car’s headlamps.

• Safer driving – Reduce chances of accidents caused by insufficient lighting while driving at night.

• Increased comfort – Enjoy a more comfortable drive without needing to constantly adjust brightness settings manually.

Q3: How Does the Auto High Beam Work on My Chevy Equinox

The Auto High Beam feature in your Chevy Equinox helps you see better when driving at night. It does this by automatically turning on the high beams when it senses that there is no other traffic around.

Here are the ways the system works:

• Automatically adjusts between low and high beam settings when approaching or passing another vehicle • Lights up dark areas earlier so that you can react more quickly

• Can detect headlights from approaching vehicles and will dim accordingly

This technology allows for a safer, smoother ride at night while providing maximum visibility to drivers.


The Auto High Beam feature on the Chevy Equinox can be a useful tool to keep you and your passengers safe while driving at night, but it can also be distracting. Fortunately, it’s easy to turn off this feature if needed. All you have to do is navigate through your dashboard settings and find the Auto High Beam option, then switch it off.

With this simple step, your headlights will no longer adjust automatically when other cars are nearby. Now that you know how to turn off the Auto High Beam in your Chevy Equinox, you’ll never again have to worry about being distracted by an overly bright headlight beam.