Driving can be an exhilarating experience with your favorite tunes blasting through the car stereo. But things can suddenly turn sour if your aux cord gets broken inside the port. This can happen due to wear and tear or an accidental pull. If you’re facing this issue, don’t fret.
With some basic tools and a little bit of patience, you can easily remove the broken aux cord from your car. In this article, we’ll discuss two methods that can help you get back to enjoying your music in no time.
Credit: www.headphonesty.com
The Causes of Aux Cord Broken
General Wear And Tear
Over time, your aux cord may get damaged from frequent use and wear and tear. This can lead to frayed wire connections, loose plugs, and damaged insulation. In addition, repeatedly unplugging and plugging the cord can also cause wear and tear, eventually leading to a broken cord.
Tension On The Cord
Another possible cause of a broken aux cord is tension. When the cord is pulled too hard, it can cause the wire connection to break inside the plug. This can happen when the cord is accidentally yanked or caught on something in the car.
Moisture Damage
Moisture damage is a common issue that can cause a broken aux cord. This can occur when water or other liquids get into the audio jack and cause corrosion to the contacts. Moisture damage can also happen when the cord gets exposed to humidity or condensation inside the car.
By understanding the common causes of a broken aux cord, you’ll be better equipped to prevent it from happening in the future. In the next section, we’ll discuss how to remove a broken aux cord from your car.
Removing The Broken Aux Cord Step by Step
When it comes to listening to music in your car, there’s nothing more frustrating than a broken aux cord. It can be a real headache to remove it from your car’s audio system without causing any damage. However, with the right tools and a little patience, removing a broken aux cord from your car’s port is not as difficult as it seems.
Here are the key steps to take to remove a broken aux cord from your car’s audio system.
Gathering The Necessary Tools
Before you begin removing the broken aux cord, you’ll need to gather a few essential tools to make the job easier.
- Needle-nose pliers or tweezers
- A flashlight
- Alcohol wipes
- Lubricant spray (optional)
- Cotton swabs
Disconnecting The Auxiliary Cord From Your Device
The first step in removing a broken aux cord is to disconnect it from your device.
- Turn off your device’s music player or any other audio output to prevent any sudden loud noises.
- Grip the remaining part of the aux cord with needle-nose pliers or tweezers so that it is as close to the audio port as possible.
- Gently pull the cord out, making sure that you do not damage the port.
Removing The Cord From The Port
After you’ve disconnected the broken aux cord from your device, it’s time to remove it from the audio port.
- Use a flashlight to inspect the port and ensure that any broken pieces of the cord are clearly visible.
- Clean the area around the port thoroughly using alcohol wipes. Lubricant spray can also be used to loosen the debris around the port.
- Use needle-nose pliers or tweezers to gently pull out any broken pieces of the cord that are still lodged inside the port. Avoid using excessive force or pressing too hard.
- Once you’ve removed all the broken pieces of the cord, clean the port once again using a cotton swab soaked in alcohol to remove any remaining debris.
Removing a broken aux cord from your car’s audio system may seem like a daunting task, but it can be achieved with a few simple tools and a little patience. Remember to disconnect the cord from your device first, and then carefully remove the broken pieces from the port using a pair of needle-nose pliers or tweezers.
With a little bit of care and attention, you’ll have your audio system up and running in no time.
Replacing The Auxiliary Port
If cleaning the port doesn’t solve the problem, it may be time to replace the auxiliary port altogether.
- Purchase a new auxiliary port that’s compatible with your car’s make and model.
- Using a screwdriver, gently remove the screws that are holding the current port in place and carefully unplug any wires that are connected to it.
- Place the new port into the slot and connect any wires that were unplugged. Make sure the screws are tight and securely holding the port in place.
- Test the new port by inserting an aux cord and making sure that it’s working properly.
By following these steps, you’ll be able to fix your car’s aux port and get back to listening to your favorite tunes in no time.
How to remove a broken aux cord from a car stereo
Preventing Future Damage
While removing a broken aux cord from your car can be quite a challenge, the best course of action is to make sure it never happens again in the first place.
Proper Cord Storage
Improper storage of your aux cord can lead to damage that can cause it to break when you least expect it.
- Keep the cord straight and untangled when not in use.
- Store the cord in a dry, cool place away from direct sunlight.
- Avoid wrapping the cord too tightly around your device or any objects.
Use Of Cord Protectors
Using cord protectors is an effective way to safeguard your aux cord from damage, and extend its service life.
- Wiresleeve: this is a wire protector that is easy to install and designed to mitigate cord fraying and damage.
- Heat shrink wrap: it is a type of tubing that shrinks when heated, leaving a tight-fitting cover over the wire to prevent damage.
- Clip-on cord protector: this is a plastic cover that is clipped on the cable to protect it from being bent in sharp angles or twisted.
Avoiding Tension On The Cord
Avoid applying tension on the aux cord when in use. Tugging at the cord can cause it to bend, fray or even snap.
- Do not yank the cord out of your device. Gently remove it by pulling it from the plug end.
- Avoid stepping on the cord while it is plugged into your device.
- Do not let the cord get caught in the car door or any moving parts.
By following these tips, you can extend the lifespan of your aux cord and avoid experiencing the frustration of a broken one. Remember to properly store your cord, use cord protectors, and avoid putting tension on it.
Frequently Asked Questions On How To Remove A Broken Aux Cord From Your Car
Can I Damage My Car’S Stereo System While Removing A Broken Aux Cord?
It is possible to damage your car’s stereo system while removing a broken aux cord if you are not careful. To avoid damaging your car’s stereo system, carefully use needle-nose pliers, tweezers or superglue to remove the broken piece. If you are unsure, seek professional help.
What Should I Do If I Can’T Remove A Broken Aux Cord From My Car?
If you are unable to remove a broken aux cord from your car, take your car to a professional to avoid causing further damage. A professional will have the right tools and expertise to remove the broken piece without causing damage to the stereo or the car.
Can I Still Use My Car’S Audio System If The Aux Cord Is Broken?
If the aux cord is broken, it is not advisable to use the car’s audio system as the broken piece may cause further damage to the stereo system. Replace the aux cord as soon as possible to avoid further damage.
Conclusion
After all is said and done, removing a broken aux cord from your car can seem like a daunting task. But if you take it step-by-step and utilize the tools at your disposal, it can be a simple and quick fix.
Remember to remain patient and gentle while working with the tools, prioritizing the safety of yourself and your car. Always be aware of the risk of damaging the audio system and take preventive measures accordingly. With this guide, you should now be equipped with all the information necessary to remove a broken aux cord from your car with minimal hassle.
Take some time to prepare yourself and your workspace, stay calm, and successfully remove that pesky cord!